Service Manual

Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
dei honor
Honor the incoming DEI value by mapping it to a system drop precedence. Enter the command once for 0 and once for 1.
Syntax
dei honor {0 | 1} {green | red | yellow}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | red | yellow Choose a color:
• Green: High priority packets that are the least preferred to be dropped.
• Yellow: Lower priority packets that are treated as best-effort.
• Red: Lowest priority packets that are always dropped (regardless of congestion
status).
Defaults Disabled; Packets with an unmapped DEI value are colored green.
Command Modes INTERFACE
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information You must first enable DEI for this configuration to take effect.
Related Commands dei enable — enables DEI.
dei mark
Set the DEI value on egress according to the color currently assigned to the packet.
Syntax
dei mark {green | yellow} {0 | 1}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | yellow Choose a color:
• Green: High priority packets that are the least preferred to be dropped.
• Yellow: Lower priority packets that are treated as best-effort.
Defaults All the packets on egress are marked with DEI 0.
Command Modes INTERFACE
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
1252 VLAN Stacking