Service Manual

brief (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP
groups.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show vrrp brief command shown in the following example.
Item Description
Interface Lists the interface type, slot and port on which the VRRP group is configured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If the track command is configured
to track that interface and the interface is disabled, the cost is subtracted from the
priority value assigned to the interface.
Pre States whether preempt is enabled on the interface.
Y = Preempt is enabled.
N = Preempt is not enabled.
State Displays the operational state of the interface by using one of the following:
NA/IF (the interface is not available).
MASTER (the interface associated with the MASTER router).
BACKUP (the interface associated with the BACKUP router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with the interface.
Example (Brief)
Dell>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description-----------------------------------------------------
TenGig 1/9 1 100 Y Master 200.200.200.200 200.200.200.201
TenGig 1/9 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203
Description
TenGig1/9 3 100 Y Master 1.1.1.1 1.1.1.2
TenGig1/9 4 100 Y Master 200.200.200.200 200.200.200.206 200.200.200.207 ...
short
desc
Dell>
Usage Information The following describes the show vrrp command shown in the following example.
Item Description
GigabitEthernet
12/3...
Displays the Interface, the VRRP group ID, and the network address. If the interface is
not sending VRRP packets, 0.0.0.0 appears as the network address.
State: master... Displays the interface’s state:
Na/If (not available)
Virtual Router Redundancy Protocol (VRRP) 1279