Service Manual

You can display the CoS mapping information applied to traffic from authenticated supplicants on 802.1X-enabled
ports that are in Single-Hot, Multi-Host, and Multi-Supplicant authentication modes.
Example
Dell#show dot1x cos-mapping interface tengigabitethernet 0/1
802.1p CoS re-map table on Te 0/1:
----------------------------------
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
Dell#
Dell#show dot1x cos-mapping interface tengigabitethernet 0/1 mac-address
00:00:00:00:00:10
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
802.1p CoS re-map table on Te 0/1:
----------------------------------
802.1p CoS re-map table for Supplicant: 00:00:00:00:00:10
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
Dell#
show dot1x interface
Display the 802.1X configuration of an interface.
Syntax
show dot1x interface interface [mac-address mac-address]
Parameters
interface Enter one of the following keywords and slot/port or number information:
For a Ten-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
For a 40–Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
mac-address (Optional) MAC address of a supplicant.
Defaults none
Command Modes
EXEC
EXEC privilege
134 802.1X