Service Manual

Defaults Not configured.
Command Modes PREFIX-LIST
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prefix are filtered.
Related Commands
permit — configures a filter to pass packets.
seq — configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
Syntax
ip prefix-list prefix-name
Parameters
prefix-name Enter a string up to 16 characters long as the name of the prefix list, up to 140 characters
long.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related Commands
show ip route list — displays IP routes in an IP prefix list.
show ip prefix-list summary — displays a summary of the configured prefix lists.
permit
Configure a filter that passes packets meeting the criteria specified.
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
Parameters
ip-prefix Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match
the first 8 bits of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix length, which is a
number from zero (0) to 32.
Access Control Lists (ACL) 185