Service Manual

in (OPTIONAL) Enter the keyword in to view only information on inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP routes.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in the
debugging command. The in and out parameters cancel each other; for example, if you enter the debug ip
bgp in
command and then enter the debug ip bgp out command, you do not see information on the
incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related Commands
debug ip bgp events — views information about BGP events.
debug ip bgp keepalives — views information about BGP keepalives.
debug ip bgp notifications — views information about BGP notifications.
debug ip bgp updates — views information about BGP updates.
show debugging — views enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
Syntax
debug ip bgp dampening [in | out]
To disable debugging, use the no debug ip bgp dampening command.
Parameters
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened routes.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
show debugging — view enabled debugging operations.
show ip bgp dampened-paths — view BGP dampened routes.
Border Gateway Protocol IPv4 (BGPv4) 295