Service Manual

*>i 6.3.0.0/18 205.171.0.16 100 0 209 7170 1455 i
*>i 6.4.0.0/16 205.171.0.16 100 0 209 7170 1455 i
*>i 6.5.0.0/19 205.171.0.16 100 0 209 7170 1455 i
*>i 6.8.0.0/20 205.171.0.16 100 0 209 7170 1455 i
*>i 6.9.0.0/20 205.171.0.16 100 0 209 7170 1455 i
*>i 6.10.0.0/15 205.171.0.16 100 0 209 7170 1455 i
*>i 6.14.0.0/15 205.171.0.16 100 0 209 7170 1455 i
*>i 6.133.0.0/21 205.171.0.16 100 0 209 7170 1455 i
*>i 6.151.0.0/1 205.171.0.16 100 0 209 7170 1455 i
--More--
show ip bgp community-list
View routes that a specific community list affects.
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name [exact-match]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related to
ipv4 unicast routes.
community-list-
name
Enter the name of a configured IP community list (maximum 140 characters).
exact-match Enter the keyword for an exact match of the communities.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The show ip bgp community-list command without any parameters lists BGP routes matching the
Community List and the output is the same as for the show ip bgp command output.
The following describes the show ip bgp community-list pass command shown in the following
example.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then
local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the destination network.
Example
Dell#show ip bgp community-list pass
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, > best
Border Gateway Protocol IPv4 (BGPv4) 327