Service Manual

Control Plane Policing (CoPP)
The Dell Networking OS supports the following CoPP commands.
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Syntax
control-plane-cpuqos
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Create a policy-map by associating a queue number with the qos-policy.
Create QoS policies prior to enabling this command.
For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.
Related Commands
qos-policy-input — creates a QoS input policy map.
policy-map-input — creates an input policy map.
11
362 Control Plane Policing (CoPP)