Service Manual

stack-unit all Enter the stack unit identification. Indicates the specific the stack unit or units. Entering
all shows the status for all stacks.
stack-port all Enter the port number of a port in a switch stack.
Default None
Command Modes CONFIGURATION mode
Command History
Version Description
9.3(0.0) Introduced on the MXL platform.
Usage Information You can configure up to a maximum of four lossless (PFC) queues. By configuring four lossless queues, you can
configure four different priorities and assign a particular priority to each application that your network is used to
process. For example, you can assign a higher priority for time-sensitive applications and a lower priority for other
services, such as file transfers. You can configure the amount of buffer space for each priority and the pause or
resume thresholds for the buffer. This method of configuration enables you to manage and administer the
behavior of lossless queues.
Example for
Configuration Mode
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-ports all test
Example for
Interface Mode
Dell(conf-if-te-1/1)#dcb-policy buffer-threshold test
priority-pgid
Assign 802.1p priority traffic to a priority group in a DCB map.
FC Flex IO Modules with MXL
Syntax
priority-pgid dot1p0_group-num dot1p1_group-num dot1p2_group-num dot1p3_group-
num dot1p4_group-num dot1p5_group-num dot1p6_group-num dot1p7_group-num
Parameters
dot1p0_group-num Enter the priority group number for each 802.1p class of traffic in a DCB map.
dot1p1_group-num
dot1p2_group-num
dot1p3_group-num
dot1p4_group-num
dot1p5_group-num
dot1p6_group-num
dot1p7_group-num
Defaults None
Command Modes DCB MAP
Data Center Bridging (DCB) 393