Service Manual

Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit 0–5 {counters | unit 0–1 counters | cpu data-plane
statistics | cpu party-bus statistics | stack-port 0–52}
Parameters
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a particular stack member and
then enter one of the following command options to clear a specific collection of data.
counters Enter the keyword counters to clear the counters on the selected stack member.
unit 0–0 counters Enter the keyword unit along with a port-pipe number, from 0 to 1, then the keyword
counters to clear the counters on the selected port-pipe.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the management
statistics.
stack-port 33–56 Enter the keywords stack-port then the port number of the stacking port to clear the
statistics of the particular stacking port. The range is from 33 to 56.
NOTE: You can identify stack port numbers by physical inspection of the rear
modules. The numbering is the same as for the 10G ports. You can also
inspect the output of the show system stack-ports command.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit 0–5 port-set 0–0 counters
402 Debugging and Diagnostics