Service Manual

Parameters
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a particular stack member and
then enter one of the following command options to clear a specific collection of data.
port-set 0–0
counters
Enter the keywords port-set along with a port-pipe number, then the keyword
counters to clear the system-flow counters on the selected port-pipe.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
show hardware layer2 acl
Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer2 acl stack-unit 0–5 port-set 0–0
Parameters
stack-unit0–5 Enter the keyword stack-unit then 0 to 5 to select a stack ID.
port-set 0–0 Enter the keywords port-set with a port-pipe number.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit 0–5 port-set 0–0
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select between ACL or QoS data.
stack-unit 0–5 Enter the keywords stack-unit then a numeral from 0 to 5 to select a stack ID.
port-set 0–0 Enter the keyword port-set with a port-pipe number.
Defaults none
Command Modes EXEC Privilege
Debugging and Diagnostics 403