Service Manual

unit 0–0 {counters
| details | port-stats
[detail] | register}
Enter the keyword unit then 0 for port-pipe 0, and then enter one of the following
keywords to troubleshoot errors on the selected port-pipe and to give status on why a
port is not coming up to register level: counters, details, port-stats
[detail]
, or register.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.8(0.0) Replaced the keyword port with interface
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show hardware stack-unit 0 phy-firmware-version
PortNumber Status Programmed Version SW Version
==================================================
41 Present 01.06 01.06
42 Present 01.06 01.06
43 Present 01.06 01.06
44 Present 01.06 01.06
45 Present 01.06 01.06
46 Present 01.06 01.06
47 Present 01.06 01.06
48 Present 01.06 01.06
49 Not Present N/A
N/A
Dell#
In the above example, the Status field represents presence of OPTM ports, Programmed versionfield represents
loaded firmware version, and SW version represents the SDK version.
Example (data-
plane)
Dell#show hardware stack-unit 0 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :0
noMhdr :0
noMbuf :0
noClus :0
recvd :0
dropped :0
recvToNet :0
rxError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
rxPkt(COS2) :0
rxPkt(COS3) :0
rxPkt(COS4) :0
rxPkt(COS5) :0
rxPkt(COS6) :0
rxPkt(COS7) :0
rxPkt(UNIT0) :0
transmitted :1696
txRequested :1696
noTxDesc :0
txError :0
txReqTooLarge :0
Debugging and Diagnostics 405