Service Manual

• Interface all queue mcast {id | all} - egress queue-level snapshot for multicast packets

only.

• Interface all prio-group {id | all} - ingress priority-group level snapshot.

Command Modes

EXEC

EXEC Privilege

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.8(0.0) Introduced on the MXL 10/40GbE Switch.

Usage Information

The following information is displayed based on the buffer-info type, such as device-level details, queue-based

snapshots, or priority group-level snapshot in the egress and ingress direction of traffic:

• Device-ingress – Displays total buffer accounting usage for the unit.

• Device-egress –Display total buffer usage for the unit, total multicast buffer usage for the unit and also on

per-service-pool basis. Counters will be displayed for the 2 service-pools – one for normal traffic and other for

DCB traffic.

When the buffer-stats-snapshot is disabled, the following informational message is displayed when you run the

show command: %Info: Buffer-stats-snapshot feature is disabled.

Example

Dell#show hardware stack-unit 1 buffer-stats-snapshot unit 3 resource

interface all queue mcast 3

Unit 1 unit: 3 port: 1 (interface Fo 1/144)

---------------------------------------