Manualshelf

Service Manual

ManualsBrandsDell ManualsserversDell Force10 MXL Blade
421422423424425426427428429430
Parameters
address Enter a list of routers that may be the default gateway for clients on the subnet. You may
specify up to eight routers. List them in order of preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
disable
Disable the DHCP server.
Syntax
disable
DHCP Server is disabled by default. To enable the system to be a DHCP server, use the no disable command.
Defaults Disabled
Command Modes DHCP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
dns-server
Assign a DNS server to clients based on address pool.
Syntax
dns-server address [address2...address8]
Parameters
address Enter a list of DNS servers that may service clients on the subnet. You may list up to
eight servers, in order of preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Dynamic Host Configuration Protocol (DHCP) 425