Service Manual

domain-name
Assign a domain to clients based on the address pool.
Syntax
domain-name name
Parameters
name Give a name to the group of addresses in a pool.
Defaults none
Command Modes DHCP <POOL>
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
Syntax
excluded-address [address | low-address high-address]
Parameters
address Enter a single address to be excluded from the pool.
low-address Enter the lowest address in a range of addresses to be excluded from the pool.
high-address Enter the highest address in a range of addresses to be excluded from the pool.
Defaults none
Command Modes DHCP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
hardware-address
For manual configurations, specify the client hardware address.
Syntax
hardware-address address
Parameters
address Enter the hardware address of the client.
Defaults none
Command Modes DHCP <POOL>
426 Dynamic Host Configuration Protocol (DHCP)