Service Manual

show ip dhcp conflict
Display the address conflict log.
Syntax
show ip dhcp conflict address
Parameters
address Display a particular conflict log entry.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show ip dhcp server
Display the DHCP server statistics.
Syntax
show ip dhcp server statistics
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Commands to Configure the System to be a DHCP
Client
To configure the system to be a DHCP client, use the following commands.
ip address dhcp
Configure an Ethernet interface to acquire its IP address from a DHCP network server.
Syntax
ip address dhcp
Command Modes INTERFACE
Default The Ethernet is not configured to operate as a DHCP client and receive a dynamic IP address.
430 Dynamic Host Configuration Protocol (DHCP)