Service Manual

debug ip dhcp clients events
Enable the display of log messages for the following events on DHCP client interfaces: IP address acquisition, IP address release, Renewal
of IP address and lease time, and Release of an IP address.
Syntax
debug ip dhcp client events [interface type slot/port]
Parameters
interface type slot/
port
Display log messages for DHCP events on the specified interface.
• For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet then the
slot/port numbers; for example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet then
the slot/port numbers; for example, fortygigabitethernet 0/2.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
debug ip dhcp clients packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface type slot/
port
Display log messages for DHCP packets sent and received on the specified interface.
• For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet then the
slot/port numbers; for example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet then
the slot/port numbers; for example, fortygigabitethernet 0/2.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
release dhcp interface
Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client configuration on the interface.
Syntax
release dhcp interface type slot/port
432 Dynamic Host Configuration Protocol (DHCP)