Service Manual

Parameters
interface type slot/
port
• For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet then the
slot/port numbers; for example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet then
the slot/port numbers; for example, fortygigabitethernet 0/2.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enter the release dhcp command, although the IP address that was dynamically-acquired from a
DHCP server is released from an interface, the ability to acquire a new DHCP server-assigned address remains in
the running configuration for the interface. To acquire a new IP address, enter either the renew dhcp command
at the EXEC privilege level or the
ip address dhcp command at the Interface Configuration level.
renew dhcp interface
Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client.
Syntax
renew dhcp interface type slot/port
Parameters
interface type slot/
port
• For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet then the
slot/port numbers; for example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet then
the slot/port numbers; for example, fortygigabitethernet 0/2.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
When you enter the renew dhcp command, a new dynamic IP address is acquired on the specified Ethernet
interface for the renewed lease time.
To display the currently configure dynamic IP address and lease time, enter the show ip dhcp lease
command.
show ip dhcp client statistics
Display DHCP client statistics, including the number of DHCP messages sent and received on an interface.
Syntax
show ip dhcp client statistics {all | interface type slot/port}
Dynamic Host Configuration Protocol (DHCP) 433