Service Manual

Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between servers
and a SAN fabric.
show fcoe-map — displays the Fibre Channel and FCoE configuration parameters in FCoE maps.
active-zoneset
Activate the zoneset.
Syntax
active-zoneset zoneset_name
To change to the default zone behavior, use the no active-zoneset zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command Modes FC FABRIC CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)# fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset zs1
Related Commands
show fc zoneset — displays the configured and active zoneset.
show fc ns
Display the devices in the name server database.
Syntax
show fc ns { switch } [brief]
Parameters
switch Enter the keyword switch to display all the devices in the name server database of the
switch.
brief Enter the keyword brief to display in brief devices in the name server database.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
458 FC FLEXIO FPORT