Service Manual

Topics:
• clear gvrp statistics
• debug gvrp
• disable
• garp timers
• gvrp enable
• gvrp registration
• protocol gvrp
• show config
• show garp timers
• show gvrp
• clear gvrp statistics
• show vlan
clear gvrp statistics
Clear GVRP statistics on an interface.
Syntax
clear gvrp statistics interface interface
Parameters
interface interface Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults none
Command Modes EXEC
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show gvrp statistics — displays the GVRP statistics.
debug gvrp
Enable debugging on GVRP.
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the no debug gvrp {config | events | pdu} command.
Parameters
config Enter the keyword config to enable debugging on the GVRP configuration.
486 GARP VLAN Registration (GVRP)