Service Manual

Defaults Not configured.
Command Modes INTERFACE VLAN — (conf-if-vl-n)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command enables the IGMP switch to send General Queries periodically. This behavior is useful when there is
no multicast router present in the VLAN because the multicast traffic is not routed. Assign an IP address to the
VLAN interface for the switch to act as a querier for this VLAN.
show ip igmp snooping mrouter
Display multicast router interfaces.
Syntax
show ip igmp snooping mrouter [vlan number]
Parameters
vlan number Enter the keyword vlan then the VLAN number. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Te 1/3, Po 1
Dell#
500 Internet Group Management Protocol (IGMP)