Service Manual

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a VLAN, enter the keyword VLAN then a number from 1 to 4094.
NOTE: This command also enables you to clear the port configurations
corresponding to a range of ports.
• You can specify multiple ports as slot/port-range. For example, if you want to
clear the port configurations corresponding to all ports between 1 and 4, specify the
port range as clear counters interfaces interface-type 1/1 - 4.
vrrp vrid] (OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To clear
the counters of a specified group, enter a VRID number from 1 to 255.
vrrp [vrf instance] (OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To clear
the counters of VRRP groups in a specified VRF instance, enter the name of the instance
(32 characters maximum).
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear unknown source address
(SA) drop counters when MAC learning limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to clear the interface configurations
corresponding to a range of ports.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
Related Commands
mac learning-limit — allows aging of MACs even though a learning-limit is configured or disallow station move on
learned MACs.
show interfaces — displays information on the interfaces.
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear
counters from a specified interface:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
Interfaces 503