Service Manual

Use the show running-config command to display the VLAN and port-channel interfaces. VLAN or port-
channel interfaces that are not displayed in the show running-config command cannot be used with the
bulk configuration feature of the
interface range command. You cannot create virtual interfaces (VLAN,
Port-channel) using the interface range command.
NOTE: If a range has VLAN, physical, port-channel, and SONET interfaces, only commands related to
physical interfaces can be bulk configured. To configure commands specific to VLAN or port-channel,
only those respective interfaces should be configured in a particular range.
Example (Single
Range)
This example shows a single range bulk configuration.
Dell(config)# interface range tengigabitethernet 5/1 - 8
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example (Multiple
Range)
This example shows how to use commas to add different interface types to the range enabling all TenGigabit
Ethernet interfaces in the range 5/1 to 5/3 and both Ten-Gigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range tengigabitethernet5/1-3,
tengigabitethernet1/1-2
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Example (Multiple
Range)
This example shows how to use commas to add SONET, VLAN, and port-channel interfaces to the range.
Dell(config-if)# interface range tengigabitethernet5/1-3,
tengigabitethernet1/1–2,
Vlan 2–100, Port 1–25
Dell(config-if-range)# no shutdown
Dell(config-if-range)#
Related Commands
interface port-channel — configures a port channel group.
interface vlan — configures a VLAN interface.
show config (from INTERFACE RANGE mode) — shows the bulk configuration interfaces.
show range — shows the bulk configuration ranges.
interface range macro (define)
Defines a macro for an interface range and then saves the macro in the running configuration.
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the interfaces — slot/port, port-
channel, or VLAN number. Select the range of interfaces for bulk configuration. You can
enter up to six comma-separated ranges. Spaces are not required between the commas.
Comma-separated ranges can include VLANs, port-channels, and physical interfaces.
Interfaces 515