Service Manual

Te 3/8 Up 0 0 5 750 2500 20
Dell#
Related Commands
dampening — configures dampening on an interface.
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces configured — displays any interface with a non-default configuration.
show interfaces description
Display the descriptions configured on the interface.
Syntax
show interfaces [interface] description
Parameters
interface (Optional) Enter one of the following keywords and slot/port or number information:
• For Loopback interfaces, enter the keyword loopback then a number from 0 to
16383.
• For the management interface on the RPM, enter the keyword
ManagementEthernet then the slot/port information. The slot range is 0-0 and
the port range is 0.
•
For the Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For VLAN interfaces, enter the keyword vlan then a number from 1 to 4094.
NOTE: This command also enables you to view information corresponding to
a range of ports. However, for Open Networking (ON) platforms the notation
for specifying port range in the command is different from how you specify in
non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-
range. For example, if you want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces
interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/
[subport] - slot/port/[subport]. For example, if you want to
display information corresponding to all ports between 1 and 4, specify the
port range as show interfaces interface-type 1/1/1 - 1/1/4.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the interface configurations
corresponding to a range of ports..
536 Interfaces