Service Manual

File Management

This chapter contains command line interface (CLI) commands needed to manage the configuration files as well as other file management

commands.

The commands in this chapter are supported by the Dell Networking Operating System (OS).

Topics:

• boot system

• cd

• copy

• copy running-config startup-config

• delete

• format flash

• HTTP Copy via CLI

• logging coredump

• logging coredump server

• pwd

• rename

• restore factory-defaults

• show boot system

• show file

• show file-systems

• show os-version

• show running-config

• show startup-config

• show version

• upgrade boot

• upgrade system

• verify

boot system

Tell the system where to access the Dell Networking OS image used to boot the system.

Syntax

boot system {gateway ip-address | stack-unit {stack-unit-number | all}}

{default | primary | secondary} {{system: {A: | B: | bmp-boot}} | tftp: }}}

To return to the default boot sequence, use the no boot system command.

Parameters

gateway Enter the IP address of the default next-hop gateway for the management subnet.

ip-address Enter an IP address in dotted decimal format.

54 File Management