Service Manual

stack-unit stack-
unit-number
(OPTIONAL) Enter the keyword stack-unit then the stack-unit-number. The range is
from 0 to 5.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the interface configurations
corresponding to a range of ports.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show interfaces switchport command for the following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”),
which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with the Dell Networking
OS version 7.6.1, this field can display native VLAN membership by port 13/0.
Example
Dell#show interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT
tagged
Name: TenGigabitEthernet 3/2
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 20
T 10
Native VlanId: 20.
Name: TenGigabitEthernet 5/2
802.1QTagged: False
Vlan membership:
Q Vlans
U 1
Name: TenGigabitEthernet 5/3
802.1QTagged: False
Vlan membership:
Q Vlans
U 1
Name: TenGigabitEthernet 5/49 (Port-channel 128)
802.1QTagged: True
Vlan membership:
Q Vlans
G 10
Name: Port-channel 128
802.1QTagged: True
Vlan membership:
Q Vlans
Dell#
540
Interfaces