Service Manual

EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module platform.
ip unreachables
Enable the generation of internet control message protocol (ICMP) unreachable messages.
Syntax
ip unreachables
To disable the generation of ICMP messages, use the no ip unreachables command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
management route
Configure a static route that points to the Management interface or a forwarding router.
Syntax
management route {{ipv4-address]/mask | {forwarding-router-address |
managementethernet}
To remove a static route, use the no management route{{ip-address mask | {ipv6-address
prefix-length}}{forwarding-router-address | managementethernet} command.
Parameters
ipv4-address]/
mask
Enter an IPv4 Address (A.B.C.D) then the prefix-length for the IP address of the
management interface.
forwarding-router-
address
Enter an IPv4 address of a forwarding router.
managementethern
et
Enter the keyword managementethernet for the Management interface.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
IPv4 Routing 581