Service Manual

ManualsBrandsDell ManualsserversDell Force10 MXL Blade

611

612

613

614

615

616

617

618

619

620

the ingress and egress direction. Flow-based monitoring conserves bandwidth by monitoring only specified traffic

instead all traffic on the interface. This feature is particularly useful when looking for malicious traffic. It is available

for Layer 2 and Layer 3 ingress and egress traffic. You may specify traffic using standard or extended access-lists.

This mechanism copies all incoming or outgoing packets on one port and forwards (mirrors) them to another port.

The source port is the monitored port (MD) and the destination port is the monitoring port (MG).

show cam-acl

Show space allocated for IPv6 ACLs.

Syntax

show cam-acl

Command Modes

• EXEC

• EXEC Privilege

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Example

show cam-acl (non default)

Dell(conf)#cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2 l2qos 1 l2pt 0

ipmacacl 0 vman-qos 0 ecfmacl 0

Dell#show cam-acl

-- Chassis Cam ACL --

Current Settings(in block sizes)

1 block = 128 entries

L2Acl : 2

Ipv4Acl : 4

Ipv6Acl : 4

Ipv4Qos : 2

L2Qos : 1

L2PT : 0

IpMacAcl : 0

VmanQos : 0

VmanDualQos : 0

EcfmAcl : 0

FcoeAcl : 0

iscsiOptAcl : 0

ipv4pbr : 0

vrfv4Acl : 0

Openflow : 0

fedgovacl : F3940

-- stack-unit 0 --