Service Manual

IPv6 Basics

This chapter describes IPv6 basic commands.

Topics:

• clear ipv6 fib

• clear ipv6 route

• clear ipv6 mld_host

• ipv6 address autoconfig

• ipv6 address

• ipv6 address eui64

• ipv6 control-plane icmp error-rate-limit

• ipv6 flowlabel-zero

• ipv6 host

• ipv6 name-server

• ipv6 nd dad attempts

• ipv6 nd dns-server

• ipv6 nd prefix

• ipv6 route

• ipv6 unicast-routing

• show ipv6 cam stack-unit

• show ipv6 control-plane icmp

• show ipv6 fib stack-unit

• show ipv6 flowlabel-zero

• show ipv6 interface

• show ipv6 mld_host

• show ipv6 route

• trust ipv6-diffserv

clear ipv6 fib

Clear (refresh) all forwarding information base (FIB) entries on a linecard or stack unit.

Syntax

clear ipv6 fib linecard slot | stack-unit unit-number

Parameters

slot Enter the slot number to clear the FIB for a linecard.

unit-number Enter the stack member number.

Command Modes EXEC Privilege

614 IPv6 Basics