Service Manual

show ipv6 cam stack-unit
Displays the IPv6 CAM entries for the specified stack-unit.
Syntax
show ipv6 cam stack-unit unit-number port-set {0-0} [summary | index | ipv6
address]
Parameters
unit-number Enter the stack unit’s ID number. The range is from 0 to 5.
port-set Enter the keyword Port Set.
summary (OPTIONAL) Enter the keyword summary to display a table listing network prefixes and
the total number prefixes which can be entered into the IPv6 CAM.
index (OPTIONAL) Enter the index in the IPv6 CAM.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: If a route has a mask greater than 64, no output is displayed and no output is displayed for
show ipv6 cam stack-unit unit-number port-set {0-1} ipv6-address, but an
equivalent /64 entry would be listed in the show ipv6 cam stack-unit unit-number port-
set {0-0}
output. Similarly, if there is more than one ECMP object with a destination route that has
a mask greater than 64, if the first 64 bits in the destination routes of the ECMP objects are the same,
only one route is installed in CAM even though multiple ECMP path entries exist.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
624 IPv6 Basics