Service Manual

Defaults As above
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This feature is advertised to BGP neighbors through a capability advertisement. In Receiver Only mode, BGP saves
the advertised routes of peers that support this capability when they restart.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled.
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The bgp log-neighbor-changes command appears in the show config command output.
Related Commands show config — views the current configuration.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems (ASs).
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs does not have their MEDs
compared).
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
In Non-Deterministic mode, paths are compared in the order in which they arrive. This method can lead to the
system choosing different best paths from a set of paths, depending on the order in which they are received from
644 IPv6 Border Gateway Protocol (IPv6 BGP)