Service Manual

ManualsBrandsDell ManualsserversDell Force10 MXL Blade

651

652

653

654

655

656

657

658

659

660

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group peer-

group-name

(OPTIONAL) Enter the keywords peer-group then the name of the peer group.

in (OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors.

out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors.

Command Modes EXEC Privilege

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Entering a no debug ip bgp command removes all configured debug commands for BGP.

debug ip bgp updates

Allows you to view information about BGP updates.

Syntax

debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6 unicast [ipv6-

address]] updates [in | out | prefix-list prefix-list-name]

To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name |

ipv6 unicast [ipv6-address]] updates [in | out] command.

Parameters

ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length in

the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group peer-

group-name

(OPTIONAL) Enter the keywords peer-group then the name of the peer group.

ipv6 unicast [ipv6-

address]

(OPTIONAL) Enter the keywords ipv6 unicast, and, optionally, an ipv6 address.

in (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors.

out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.