Service Manual

Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name Enter the name of the peer group to remove the private AS numbers.
Defaults Disabled (that is, the private AS number are not removed).
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Applies to external border gateway protocol (EBGP) neighbors only.
If the AS-PATH contains both public and private AS number or contains AS numbers of an EBGP neighbor, the
private AS numbers are not removed.
If a confederation contains private AS numbers in its AS-PATH, the software removes the private AS numbers
only if they follow the confederation numbers in the AS path.
Private AS numbers are from 64512 to 65535.
neighbor route-map
Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.
Syntax
neighbor {ipv6-address | peer-group-name} route-map map-name {in | out}
To remove the route map, use the no neighbor {ipv6-address | peer-group-name} route-map
map-name {in | out} command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name Enter the name of the peer group.
map-name Enter the name of an established route map. If the Route map is not configured, the
default is deny (to drop all routes).
in Enter the keyword in to filter inbound routes.
out Enter the keyword out to filter outbound routes.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
IPv6 Border Gateway Protocol (IPv6 BGP) 669