Service Manual

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enter the redistribute ospf process-id command without any other parameters, the system
redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
as-number Enter the AS number. The range is from 1 to 65535.
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address.
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Defaults
• EXEC
• EXEC Privilege
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Command
capture bgp-pdu neighbor (ipv6) — enables capture of an IPv6 BGP neighbor packet.
capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.
678 IPv6 Border Gateway Protocol (IPv6 BGP)