Service Manual
If the route map is not configured, the default is deny (to drop all routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you do not configure the default-metric command, in addition to the redistribute command, or there
is no route map to set the metric, the metric for redistributed static and connected is “0”.
To redistribute the default route (0::0/0), configure the neighbor default-originate command.
Related Commands neighbor default-originate — injects the default route.
show ip bgp ipv6 unicast
View the current BGP information.
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-prefixes]]
Parameters
network (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network
to view information only on that network.
network-mask (OPTIONAL) Enter the keywords network mask (in slash prefix format) of the BGP
network address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prefix.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp command output for a
BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
IPv6 Border Gateway Protocol (IPv6 BGP) 705