Service Manual

Command Fields

Lines Beginning

With

Description

Dell Force10

Network...

Name of the operating system

Dell Force10

Operating...

OS version number

Dell Force10

Application...

Software version

Build Time... Software build’s date stamp

Build Path... Location of the software build files loaded on the system

Dell Force10 uptime

is...

Amount of time the system has been up

System image... Image file name

Chassis Type: Chassis type (for example, E1200, E600, E600i, E300, C300, C150, S25, S50, S55, S60,

S4810)

Control

Processor:...

Control processor information and amount of memory on processor

128K bytes... Amount and type of memory on system

1 34 Port Hardware configuration of the system, including the number and type of physical

interfaces available

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax

upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 |

all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}

Parameters

all Enter the keyword all to change both the bootflash and bootselecter images.

bootflash-image Enter the keywords bootflash-image to change the bootflash image.

bootselector-image Enter the keywords bootselector-image to change the bootselector image.

0–5 Enter the keyword 0–5 to upgrade all stack-units.

all Enter the keyword all to upgrade all the member stack-units.

booted Enter the keyword booted to upgrade from the current image in the MXL 10/40GbE

Switch.

ftp: After entering the keyword ftp:, you can either follow it with the location of the source

file in this form: //userid:password@hostip/filepath or press Enter to launch

a prompt sequence.

tftp: After entering the keyword tftp:, you can either follow it with the location of the

source file in this form: //hostlocation/filepath or press Enter to launch a

prompt sequence.

File Management 71