Service Manual

Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• distribute-list out — suppresses networks from being advertised in updates.
• redistribute — redistributes routes from one routing domain to another routing domain.
distribute-list out
Suppress network prefixes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-
id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name out [bgp as
number connected | ospf process-id | rip | static] command.
Parameters
prefix-list-name Specify the prefix list to filter prefixes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing process.
ospf process-id (OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is
from 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-configured routing process.
Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information You can assign a name to a routing process so a prefix list IS applied to only the routes derived from the specified
routing process.
Related Commands
• distribute-list in — filters the networks received in updates.
732 Intermediate System to Intermediate System (IS-IS)