Service Manual

Control and Monitoring
The Dell Networking OS supports the following control and monitoring commands.
asset-tag
Assign and store a unique asset-tag to the stack member.
Syntax
asset-tag stack-unit unit id Asset-tag ID
To remove the asset tag, use no stack-unit unit-id Asset-tag ID command.
Parameters
stack-unit unit-id Enter the keywordsstack-unit then the unit-id to assign a tag to the specific
member. The range is from 0 to 5.
Asset-tag ID Enter a unique asset-tag ID to assign to the stack member. This option accepts a
maximum of 10 characters, including all special characters except double quotes. To
include a space in the asset-tag, enter a space within double quotes.
Defaults No asset-tag is assigned.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show system — Displays the current status of all stack members or a specific member.
asf-mode
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
Syntax
asf-mode stack-unit {unit-id | all} queue size
To return to standard Store and Forward mode, use the no asf-mode stack unit command.
Parameters
unit-id Enter the stack member unit identifier of the stack member to reset. The range is from 0
to 5 or all.
queue size Enter the queue size of the stack member. The range is from 0 to 5.
Defaults Not configured
Command Modes CONFIGURATION
4
Control and Monitoring 75