Service Manual

Link Aggregation Control Protocol (LACP)

This chapter contains commands for Dell Networks’s implementation of the link aggregation control protocol (LACP) for creating dynamic

link aggregation groups (LAGs) — known as port-channels in the Dell Networking Operating System (OS).

NOTE: For static LAG commands, refer to theInterfaces chapter), based on the standards specified in the IEEE 802.3 Carrier

sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications.

Topics:

• clear lacp counters

• debug lacp

• lacp long-timeout

• lacp port-priority

• lacp system-priority

• port-channel mode

• port-channel-protocol lacp

• show lacp

clear lacp counters

Clear port channel counters.

Syntax

clear lacp port-channel-number counters

Parameters

port-channel-

number

Enter a port-channel number. The range is from 1 to 128.

Defaults Without a Port Channel specified, the command clears all Port Channel counters.

Command Modes

• EXEC

• EXEC Privilege

Command History

Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands show lacp — displays the LACP configuration.

debug lacp

Debug LACP (configuration, events, and so on).

Syntax

debug lacp [config | events | pdu [interface [in | out]]]

766 Link Aggregation Control Protocol (LACP)