Service Manual

exec-banner — Enables the display of a text string when you enter EXEC mode.
line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
Syntax
banner login {acknowledgement | keyboard-interactive | c line c}
Enter no banner login to delete the banner text. Enter no banner login keyboard-interactive to
automatically go to the banner message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyword keyboard-interactive to require a carriage return (CR) to get
the message banner prompt.
acknowledgement Enter the acknowledgement keyword to require a positive acknowledgement from the
user while logging in to the system.
c Enter a delineator character to specify the limits of the text banner. The delineator is a
percent character (%).
line Enter a text string for your text banner message ending the message with your
delineator. The delineator is a percent character (%). Range: maximum of 50 lines, up to
255 characters per line
Defaults No banner is configured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Command History
Version Description
9.10(0.0) Introduced the acknowledgement keyword.
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information A login banner message displays only in EXEC Privilege mode after entering the enable command then the
password. These banners do not display to users in EXEC mode.
Example
Dell(conf)#banner login ?
acknowledgement Require positive acknowledgment after login prompt
keyboard-interactive Press enter key to get prompt
LINE c banner-text(max length 255) c, where 'c' is a
delimiting character
Dell(conf)#no banner login ?
acknowledgement Disable positive acknowledgment required after login
prompt
keyboard-interactive Prompt will be displayed by default
If you configure the acknowledgement keyword, the system requires a positive acknowledgement from the
user while logging in to the system.
$ telnet 10.11.178.16
Trying 10.11.178.16...
Connected to 10.11.178.16.
Escape character is '^]'.
THIS IS A LOGIN BANNER. PRESS ‘Y’ TO ACKNOWLEDGE. ACKNOWLEDGE?
Control and Monitoring 77