Service Manual

clear mac-address-table
Clear the MAC address table.
Syntax
clear mac-address-table dynamic {address mac-address | all | interface
interface | vlan vlan-id}
Parameters
address mac-
address
Enter the keyword address then a MAC address in nn:nn:nn:nn:nn:nn format.
all Enter the keyword all to delete all MAC address entries in the MAC address table.
terface interface Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to 4094.
Command Modes EXEC Privilege
Command History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
mac-address-table aging-time
Specify an aging time for MAC addresses to remove from the MAC address table.
Syntax
mac-address-table aging-time seconds
To delete the configured aging time, use the no mac-address-table aging-time seconds command.
Parameters
seconds Enter either zero (0) or a number as the number of seconds before MAC addresses are
relearned. To disable aging of the MAC address table, enter 0. The range is from 10 to
1000000. The default is 1800 seconds.
Defaults 1800 seconds
Command Modes CONFIGURATION
Command History
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Layer 2 773