Service Manual

show cam mac stack-unit
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id]
[interface interface]
Parameters
stack-unit
unit_number
(REQUIRED) Enter the keyword linecard then a stack member number to select the
linecard for which to gather information. The range is 0 to 5.
port-set port-pipe (REQUIRED) Enter the keywords port-set then a Port-Pipe number to select the
Port-Pipe for which to gather information. The range is 0.
address mac-addr (OPTIONAL) Enter the keyword address then a MAC address in the nn:nn:nn:nn:nn:nn
format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses learned
dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC address specifically
configured on the switch.
interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address
assigned to the VLAN. The range is 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show mac-address-table
Display the MAC address table.
Syntax
show mac-address-table [dynamic | static] [address mac-address | interface
interface | vlan vlan-id] [count [vlan vlan-id] [interface interface-type [slot
[/port]]]]
Parameters
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the
switch dynamically learns. Optionally, you can also add one of these combinations:
address/mac-address, interface/interface, or vlan vlan-id.
778 Layer 2