Service Manual

[y/n]: y

Password:

Related Commands

banner motd — sets a Message of the Day banner.

exec-banner — enables the display of a text string when you enter EXEC mode.

banner motd

Set a message of the day (MOTD) banner.

Syntax

banner motd c line c

Parameters

c Enter a delineator character to specify the limits of the text banner. The delineator is a

percent character (%).

line Enter a text string for your message of the day banner message ending the message with

your delineator. The delineator is a percent character (%).

Defaults No banner is configured.

Command Modes CONFIGURATION

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information A MOTD banner message displays only in EXEC Privilege mode after entering the enable command then the

password. These banners do not display to users in EXEC (non-privilege) mode.

Related Commands

banner exec — enables the display of a text string when you enter EXEC mode.

banner login — sets a banner to display after successful login to the system.

clear alarms

Clear alarms on the system.

Syntax

clear alarms

Command Modes EXEC Privilege

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information This command clears alarms that are no longer active. If an alarm situation is still active, it is seen in the system

output.

78 Control and Monitoring