Service Manual

Usage Information
To return VLAN 1 as the Default VLAN, use the (default-vlan-id 1) command.
The Default VLAN contains only untagged interfaces.
Related Commands interface vlan — configures a VLAN.
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured as a member of another
VLAN.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The no default vlan disable command is not listed in the running-configuration, but when the default
VLAN is disabled, default-vlan disable is listed in the running-configuration.
name
Assign a name to the VLAN.
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command Modes INTERFACE VLAN
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To display information about a named VLAN, enter the show vlan command with the name parameter or the
show interfaces description command.
Related Commands
description — assigns a descriptive text string to the interface.
interface vlan — configures a VLAN.
show vlan — displays the current VLAN configurations on the switch.
Layer 2 783