Service Manual

Parameters
coordinate-based
value
Enter the keywords coordinate-based then the coordinated based location in
hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based then the civic based location in hexadecimal format.
The range is from 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency
Location Identification Number (elin) numeric location string. The range is from 10 to 25
characters.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
• ECS — Emergency call service such as defined by TIA or the national emergency numbering association
(NENA)
• ELIN — Emergency location identification number, a valid North America Numbering Plan format telephone
number supplied for ECS purposes.
Related Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med power-via-mdi
To advertise the Extended Power via MDI TLV, configure the system.
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered, LLDP-MED
endpoint device.
Related Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
Link Layer Discovery Protocol (LLDP) 799