Service Manual

Version Description
9.3(0.0) Added support for multicast MAC address on the MXL platform.
Example (Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan 2 output—range Te
0/2,Te 0/3}
ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL Switch .
Default Disabled
Usage Information By default this command is disabled. There might be some ARP table entries which are resolved through ARP
packets which had Ethernet MAC SA different from MAC information inside the ARP packet. This unicast data
traffic flooding occurs only for those packets which use these ARP entries.
Microsoft Network Load Balancing 807