Service Manual

ip msdp redistribute

Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until they time out, they continue to

reside in the MSDP SA cache.

Syntax

ip msdp redistribute [list acl-name]

Parameters

list acl-name Enter the name of an extended ACL that contains permitted SAs. If you do not use this

option, all local entries are blocked.

Defaults Not configured.

Command Modes CONFIGURATION

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Modifications to the ACL do not have an immediate effect on the sa-cache.

To apply the redistribute filter to entries already present in the SA cache, use the clear ip msdp sa-cache

local command.

ip msdp sa-filter

Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specified peer.

Syntax

ip msdp sa-filter {in | out} peer-address list [access-list name]

Remove this configuration using the no ip msdp sa-filter {in | out} peer address list

[access-list name] command.

Parameters

in Enter the keyword in to enable incoming SA filtering.

out Enter the keyword out to enable outgoing SA filtering.

peer-address Enter the peer address of the MSDP peer in a dotted decimal format (A.B.C.D.).

access-list name Enter the name of an extended ACL that contains permitted SAs. If you do not use this