Service Manual

Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2.(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example (Static)
Dell#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change: 00:00:23
Example (Snooping)
Dell#show ip mroute snooping
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 4/13
(*, 225.1.2.1), uptime 00:04:16
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 0/4
TenGigabitEthernet 1/5
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 0/3
TenGigabitEthernet 0/4
TenGigabitEthernet 0/5
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 0/2
Outgoing interface list:
TenGigabitEthernet 0/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: TenGigabitEthernet 1/4
Outgoing interface list:
TenGigabitEthernet 0/6
TenGigabitEthernet 0/7
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 1/2
Outgoing interface list:
TenGigabitEthernet 1/4
Usage Information The following describes the show ip mroute command shown in the following example.
Field Description
(S, G) Displays the forwarding entry in the multicast route table.
uptime Displays the amount of time the entry has been in the multicast forwarding table.
Multicast 835