Service Manual

mask Specify a mask for the destination prefix. Enter the full mask (for example,

255.255.255.0).

not-advertise (OPTIONAL) Enter the keywords not-advertise to set the status to DoNotAdvertise

(that is, the Type 3 summary-LSA is suppressed and the component networks remain

hidden from other areas.)

Defaults Not configured.

Command Modes ROUTER OSPF

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information Only the routes within an area are summarized, and that summary is advertised to other areas by the ABR.

External routes are not summarized.

Related Commands

area stub — creates a stub area.

router ospf — enters ROUTER OSPF mode to configure an OSPF instance.

area stub

Configure a stub area, which is an area not connected to other areas.

Syntax

area area-id stub [no-summary]

To delete a stub area, use the no area area-id stub command.

Parameters

area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero

(0) to 65535.

no-summary (OPTIONAL) Enter the keywords no-summary to prevent the ABR from sending

summary Link State Advertisements (LSAs) into the stub area.

Defaults Disabled.