Service Manual

Field Description
dr: Displays the IP address of the designated router.
bdr: Displays the IP address of the Border Area Router.
Example
Dell#debug ip ospf 1 packet
OSPF process 90, packet debugging is on
Dell#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:224.0.0.5
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
default-information originate
To generate a default external route into an OSPF routing domain, configure the system.
Syntax
default-information originate [always] [metric metric-value] [metric-type type-
value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information must
always be advertised.
metric metric-value (OPTIONAL) Enter the keyword metric then a number to configure a metric value for
the route. The range is from 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then an OSPF link state type of 1 or 2
for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map.
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands redistribute — redistributes routes from other routing protocols into OSPF.
Open Shortest Path First (OSPFv2 and OSPFv3) 865