Service Manual

Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
This command is useful in isolating routing problems between the OSPF and the RTM. For example, if a route is
missing from the RTM/FIB but is visible from the display output of this command, the problem is with downloading
the route to the RTM.
This command has the following limitations:
• The display output is sorted by prefixes; intra-area ECMP routes are not displayed together.
• For Type 2 external routes, Type 1 cost is not displayed.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Te 0/4 1 Intra-Area
13.0.0.0 1 0.0.0.0 Te 0/4 0 Intra-Area
150.150.150.0 2 13.0.0.3 Te 0/4 - External
172.30.1.0 2 13.0.0.3 Te 0/4 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
Syntax
show ip ospf process-id statistics global | [interface name {neighbor router-
id}]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered,
command applies only to the first OSPF process.
global Enter the keyword global to display the packet counts received on all running OSPF
interfaces and packet counts OSPF neighbors receive and transmit.
interface name (OPTIONAL) Enter the keyword interface then one of the following interface
keywords and slot/port or number information:
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For Port Channel groups, enter the keywords port-channel then a number. The
range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
902 Open Shortest Path First (OSPFv2 and OSPFv3)